Who we are
Welcome to Precision Golf Works — where every club is crafted for your performance.
With over 15 years of experience as a golf professional and certified club builder, we bring true precision to every repair and custom build. Rather than settling for off-the-rack clubs, our work is designed specifically around your swing so you play better, more consistently, and with confidence.
Why Precision Golf Works?
Tour-Level Experience
With more than 15 years as a PGA professional and certified club builder, we apply the same meticulous attention to detail that touring professionals receive. Therefore, your clubs aren’t just fixed — they’re fine-tuned for performance.
Precision Equipment
Precision matters. We use advanced digital tools for swingweighting, frequency matching, and loft/lie calibration. As a result, every club is built or repaired to exact specifications instead of guesswork.
Local, Trusted Craftsmanship
Because we’re locally based in Daytona Beach and serve golfers in Port Orange, Ormond Beach, and Greater Volusia County, you get honest, detail-focused workmanship backed by hometown service — not just another big-box experience.
What We Offer
Club Repair & Tune-Ups
Loft/lie checks, loose heads, rattle fixes, shaft repairs, ferrules, and full club diagnostics.
Re-Shafting
Install, spine alignment, tip prep, and matching feel across your set.
Re-Gripping
Choose from today’s top grips—Golf Pride, Lamkin, Winn, SuperStroke—installed cleanly and quickly.
Custom Club Building
Your heads + your shafts, built to exact tolerances: length, loft/lie, swingweight, and frequency.
Frequency Matching
Consistent flex and feel through the entire set for better tempo and tighter dispersion.
Swingweight Matching
Dial in each club so your set feels unified from long irons to wedges.
Golf Club Fittings in Daytona Beach, FL
When it comes to club fitting, precision isn’t optional — it’s essential.
Instead of relying on guesswork, we analyze your swing with the GC Quad to provide advanced launch monitor data. With this information, we tailor fittings for drivers, irons, wedges, and full sets so you gain consistent distance, tighter dispersion, and better performance overall. Every fitting uses advanced launch monitor data and expert analysis to dial in distance, accuracy, and consistency for golfers throughout Daytona Beach and Volusia County.
Driver, iron, wedge & full bag fittings
Data-driven launch monitor analysis
Honest recommendations — no pressure sales
Serving Daytona Beach & Volusia County golfers
Meet Sam – Founder, Club Builder & Former Golf Professional
Over 15 years in the golf industry taught Sam one thing: quality equipment built to your swing makes a real difference. Therefore, he launched Precision Golf Works to give local golfers access to true custom-shop quality — without the shortcuts often found at big-box retailers.
My approach is simple:
- Build with intention
- Check everything twice
- Match specs across your set
- Treat every repair like it’s going into my own bag
Whether you need a tune-up or precision matching across all 14 clubs, I’ll make sure you walk away with equipment that actually fits the way you swing.
Hear from our Customers!
Some of the Brands We Carry
Follow us on Instagram!
Sam Mindlin
Ex-professional building and fitting golf clubs for golfers of every level.
⛳ HAVE YOU HEARD OF SUB 70 GOLF? 👀
If you’re looking for high-quality golf equipment without paying some of the prices you see from the major OEMs, Sub 70 Golf deserves a serious look.
@GolfSub70 has built its reputation around a simple idea: premium, high-performance golf equipment at a fair price.
From drivers and fairway woods to hybrids, irons, wedges and putters, Sub 70 offers a full lineup of equipment with options for golfers of different skill levels—and their clubs are custom built in Sycamore, Illinois. 🇺🇸
And the best part for golfers here in the Daytona Beach area?
👉 You can check out Sub 70 equipment right here at Precision Golf Works!
Instead of guessing what head, shaft or setup is right for you, come in and let’s find a combination that actually fits YOUR swing.
🔥 Premium quality
🔥 Custom options
🔥 Excellent value
🔥 Equipment built around performance
Want to learn more about Sub 70?
📲 Instagram: @golfsub70
📲 TikTok: @golfsub70
🌐 golfsub70.com
Ready to try Sub 70 or schedule a fitting?
📍 Precision Golf Works
4645 Clyde Morris Blvd, Suite 407
Port Orange, FL 32129
📞 (386) 227-6432
📧 info@precisiongolfdaytona.com
🌐 precisiongolfdaytona.com
👉 Stop by, give me a call, or book a fitting and let’s see if Sub 70 belongs in your bag!
#Sub70 #Sub70Golf #GolfEquipment #GolfFitting #precisiongolfworks
🚨 IS YOUR GOLF GRIP FAKE? 🚨
Counterfeit golf grips are more common than you might think—especially when buying online from third-party sellers or when the price seems way too good to be true.
In this video, I break down some of the things you can look for when trying to spot a counterfeit grip, including:
🔍 Logo, lettering & printing quality
✋ Rubber texture and overall feel
⚖️ Weight and consistency
🎨 Color and finish differences
📦 Packaging and other small details
A fake grip might look pretty convincing at first glance, but once you compare it to the real thing, the differences can become much easier to spot.
And remember: your grips are your only connection to the golf club. Quality matters!
If you’re unsure about the grips on your clubs, bring them by Precision Golf Works and I’ll be happy to take a look. We carry and professionally install grips from Golf Pride, Lamkin, Winn, SuperStroke and more. (Precision Golf Works)
📍 Precision Golf Works
4645 Clyde Morris Blvd, Suite 407
Port Orange, FL 32129
📞 (386) 227-6432
📧 info@precisiongolfdaytona.com
🌐 precisiongolfdaytona.com
👉 Think you might have a counterfeit grip? Bring it in and let’s compare it to the real thing!
#GolfGrips #GolfEquipment #GolfTips #GolfClubRepair #precisiongolfworks
Buying new clubs? Don’t assume they arrived exactly to spec. 👀⛳
Even brand-new clubs can have inconsistencies in loft, lie angle, length, swingweight, or overall build quality. Small differences might not sound like much, but they can affect your distance gaps, ball flight, feel, and consistency.
If your clubs weren’t built and checked by a professional club builder, it’s worth having them inspected before assuming everything is exactly where it should be.
🔧 That’s why I’ll spot-check your clubs for FREE at Precision Golf Works.
Bring a few clubs in and I’ll check key specs to see if everything looks right. If we find something that needs attention, we can talk about the best way to get your set dialed in.
📍 Precision Golf Works
4645 Clyde Morris Blvd, Suite 407
Port Orange, FL 32129
📞 (386) 227-6432
📧 info@precisiongolfdaytona.com
🌐 precisiongolfdaytona.com
New clubs don’t always mean correctly built clubs. Know your specs.
#PrecisionGolfWorks #GolfClubs #GolfEquipment #ClubBuilding #golfclubfitting
🏌️ ARE LOW-SPIN DRIVER HEADS ONLY FOR GOOD GOLFERS OR HIGH SWING SPEEDS? 🤔
Not necessarily.
There’s a common misconception that low-spin driver heads are only designed for high-speed players or really good golfers. But your handicap and clubhead speed don’t tell the whole story.
A golfer with a moderate swing speed can still generate too much spin because of their impact location, angle of attack, dynamic loft, or overall delivery. In that case, a lower-spin head might actually produce better launch conditions, more distance, and a more efficient ball flight.
On the flip side, a high-speed player doesn’t automatically need the lowest-spinning head available. Take away too much spin and you can actually hurt carry distance and consistency.
👉 The goal isn’t LOW spin. It’s OPTIMAL spin.
That’s why you shouldn’t choose a driver simply because it says “LS” on the head—or avoid one because you think you don’t swing fast enough.
Get the numbers. Test different combinations. Find out what actually works for YOUR swing.
📍 Precision Golf Works
4645 Clyde Morris Blvd, Unit 407
Port Orange, FL 32129
📞 (386) 227-6432
📧 info@precisiongolfdaytona.com
🌐 precisiongolfdaytona.com
⛳ Think you might be playing the wrong driver head? Book a driver fitting and let’s find out.
#GolfFitting #DriverFitting #GolfEquipment #GolfTips #precisiongolfworks
⛳ MIZUNO GOLF IS NOW AT PRECISION GOLF WORKS! 🔥
We’re excited to add Mizuno Golf to the lineup at Precision Golf Works!
If you’ve been thinking about new irons, now is the perfect time to get fit. Mizuno is known for incredible feel, performance, and craftsmanship — but the right head is only part of the equation. We’ll help you find the combination of head, shaft, length, lie, and setup that works best for YOUR swing.
🎉 SPECIAL OFFER: FREE IRON FITTING
Purchase a set of irons from Precision Golf Works and your professional iron fitting is FREE!
At Precision Golf Works, we can help you with more than just equipment:
🏌️ Professional Club Fittings
🔵 Mizuno Golf Clubs
📊 GCQuad Launch Monitor Analysis
🔧 Custom Club Building & Repair
🎯 Golf Lessons & Swing Instruction
Whether you need better equipment, want to improve your swing, or both, we can help you build a setup that works for your game.
📅 Ready to get fit? Book your appointment today!
📍 Precision Golf Works
4645 Clyde Morris Blvd, Suite 407
Port Orange, FL 32129
📞 (386) 227-6432
📧 info@precisiongolfdaytona.com
🌐 precisiongolfdaytona.com
Better Clubs. Better Game. Built Around You.
#PrecisionGolfWorks #MizunoGolf #GolfFitting #CustomGolfClubs #DaytonaBeachGolf
Another bender of @golfkzg Pur irons going out the door with custom @bbandfco ferrules. These things are Pure for sure!
#golfequipment #golfclub #kzg #precisiongolf #golffitting
Can your tee height and golf ball gain you 20-plus yards with your Driver? Absolutely!
Too many golfers are using the wrong golf ball for their swing and also the wrong tee height. We are often taught to tee it high and let it fly. But that can be losing you distance. Hitting the ball high on the face with the driver can produce too little spin, causing the ball to fall out of the air and not give you as much distance as you could. Hitting the center of the face is king, so make sure to adjust your tee height to max out your drives. Then you have to make sure the golf ball fits you. If the golf ball spins too little, your golf ball will again drop out of the air and not get you your ideal distance—the same goes for your irons. If you are playing a golf ball that doesn’t give you enough spin, you won’t be able to hold the greens.
#golfequipment #golfball #golftee #golfclubfitting #precisiongolf
Want MORE SPIN? 🏌️♂️💨
What actually creates spin — the clubhead, golf ball, or shaft? The answer might not be what you think.
In this video, I break down the biggest equipment factors that influence spin and explain where you should actually focus if you’re trying to optimize your numbers.
The right combination of clubhead + ball + shaft matters, but they don’t all influence spin equally. And remember — equipment can only optimize what your delivery and strike give it!
This is exactly why a proper fitting is about more than just finding a shaft that “feels good.” We look at the entire system to get your equipment working with YOUR swing.
📍 Precision Golf Works | Port Orange, FL
#GolfFitting #GolfEquipment #GolfTips #GolfClubFitting #PrecisionGolfWorks
Think you need a $350+ premium shaft to play better? Think again. 👀⛳
Not every golfer needs the most expensive shaft on the market. In this video, I break down some excellent alternatives that can deliver outstanding performance without the premium price tag. The right shaft is about fit, not just cost.
A proper fitting can help you:
✅ Improve consistency
✅ Increase ball speed and distance
✅ Tighten dispersion
✅ Save money by choosing the shaft that actually fits your swing
At Precision Golf Works, I carry a wide variety of shaft options to fit every swing and every budget. Whether you’re chasing more distance, accuracy, or a better feel, I’ll help you find the best combination for your game.
📍 Precision Golf Works
4645 Clyde Morris Blvd, Unit 407
Port Orange, FL 32129
📞 (386) 227-6432
📧 info@precisiongolfdaytona.com
🌐 precisiongolfdaytona.com
Have questions about your current shaft? Drop them in the comments or schedule a fitting today!
#PrecisionGolfWorks #GolfFitting #GolfShafts #CustomFitting #golfequipment
A lot of golfers pick shaft flex based on swing speed alone — but tempo (how smoothly and quickly you transition from backswing to downswing) plays just as big a role. A fast, aggressive transition needs more support than a slow, smooth one, even at the same clubhead speed. Get it wrong and you’ll either lose control (too whippy) or lose feel and distance (too stiff).
The only way to really know? Get on a launch monitor and test it for yourself.
📍 Precision Golf Works – 4645 Clyde Morris Blvd, Unit 407, Port Orange, FL 32129
📞 (386) 227-6432
✉️ info@precisiongolfdaytona.com
🌐 precisiongolfdaytona.com
Better Clubs. Better Game. Built Around You.
#PrecisionGolfWorks #GolfFitting #ClubFitting #GolfShafts #ShaftFlex
Let's Get You Playing The Best Golf of Your Life!
Ready to get the most out of your golf game? We’re here to listen, collaborate, and help, whether it is with equipment or instruction. Reach out — we can’t wait to hear from you!
Visit us
4645 Clyde Morris Blvd Suite 407 Port Orange, FL 32129
Write to us
Call us
(386) 227-6432
